glass forming
英 [ɡlɑːs ˈfɔːmɪŋ]
美 [ɡlæs ˈfɔːrmɪŋ]
网络 玻璃成型; 玻璃成形; 玻璃形成
双语例句
- The glass forming ability and the thermal stability were also investigated by differential scanning calorimetry ( DSC) and X-Ray diffraction ( XRD).
利用XRD和DSC等手段对该合金的形成能力及热稳定性进行了分析。 - Effects of P on Glass Forming Ability and Magnetic Properties of Fe-based Alloys
P对Fe基非晶合金玻璃形成能力及磁性能的影响 - New manufacture processes and new glass forming systems will play a great part in the development of low-temperature seal glass.
新的制备工艺和新的玻璃形成体系将对封接玻璃发展起着十分重要的作用。 - Effects of Melt Over-heating Treatment on Glass Forming Ability ( GFA) of Al-based Alloys
熔体过热处理对铝基合金非晶形成能力的影响 - The Effect of Technics on the Glass Forming Ability and Mechanical Properties of Cu-based Bulk Metallic Glasses
制备工艺对铜基非晶玻璃形成能力及力学性能的影响 - Effect of Ti on Glass Forming Ability of Cu-Zr Glassy Alloy
Ti对Cu-Zr合金非晶形成能力的影响 - Glass forming pressure needed to provide air pressure, the normal pressure is6-8 MPa.
杯子成型需要气压提供，正常气压为6-8兆帕。需要配三立方空压机。 - Influence of CO on the glass forming ability and soft magnetic property of Fe-B-Y-Nb bulk amorphous alloy
Co对Fe-B-Y-Nb块体非晶合金玻璃形成能力及软磁性能的影响 - Theoretical Calculation of Float Glass Forming Process Technical Parameters
浮法玻璃成型工艺技术参数的理论计算 - Effect of Cu on glass forming ability and mechanical properties of Mg-Zn-Ca alloys
Cu对Mg-Zn-Ca合金非晶形成能力与力学性能的影响 - Glass Forming Ability Criteria for Bulk Amorphous Alloys Based on Component Elastic Constants
基于组元弹性常数的大块非晶合金形成判据 - The glass forming ability, the behavior of crystallization and mechanical properties of the Cu-Zr-based bulk metallic glasses have been investigated.
本论文以铜锆基大块非晶合金为研究对象，研究了其非晶形成能力、晶化行为和力学性能。 - Effect of GD addition on the glass forming ability and mechanical properties in a Zr-based bulk amorphous alloy
稀土Gd掺杂对锆基块体非晶合金玻璃形成能力及力学性能的影响 - According to the systematic analysis about effects of different alloy elements on the glass forming ability, room-temperature mechanical properties, new Mg-based bulk amorphous alloys with low cost have been developed.
通过对不同合金元素的影响进行系统分析，对玻璃形成能力、室温力学性能等进行研究，实现了低成本制备新型镁基大块非晶合金。 - Research Progress of Bulk Metallic Glass Forming Ability
块状金属玻璃形成能力的研究与进展 - Glass forming regions in ZrF_4-AlF_3-YF_3-BaF_2-CaF_2 system are determined.
本文确定了ZrF4-AlF3-YF3-BaF2-CaF2系统的玻璃形成区。 - Prediction of glass forming ability using atomic radius and electro-negativity
以原子半径和电负性预测玻璃形成能力 - The glass forming ability of binary Cu-Zr amorphous alloys can be increased evidently with Al addition.
在二元Cu-Zr合金中添加Al元素可明显提高合金的非晶形成能力。 - The glass forming ability decreases as the content of network former Ge decreases.
含钆硫化物的玻璃形成能力还随网络形成体Ge含量的减少而降低。 - This work focuses on analysis and studying of the newly discovered Pr-Cu-Ni-Al bulk metallic glasses ( BMGs), including its glass forming range, glass forming ability ( GFA) and thermal properties.
本论文以新型的Pr-Cu-Ni-Al系大块金属玻璃作为研究对象，对这一体系的非晶形成范围、形成能力以及热学性质进行了研究和分析。 - In this paper TeO_2-PbO-B_2O_3-Al_2O_3 System glass forming area and glass manufacturing process are investigated.
本文研究了TeO2-PbO-B2O3-Al2O3系统的玻璃形成区和玻璃制备工艺； - Glass forming ability and magnetic property of Co-based amorphous alloy
Co基非晶合金形成能力与磁学性能研究 - The glass forming region and crystalline phase in Li 2O BaO SiO 2 system are determined. The isopleth of water attack and coefficient of thermal expansion are obtained.
测定了Li2OBaOSiO2系统的玻璃形成范围和结晶相，得到了等水溶性和等膨胀系数曲线。 - The effect of Ni, Zr, Cu and Y elements on the glass forming ability and the thermal stability of the alloy system has been investigated.
利用差示扫描量热仪（DSC），扫描电镜（SEM），X衍射（XRD）等手段，研究合金中Ni、Zr、Cu及Y元素对该合金系非晶形成能力及热稳定性的影响。 - In the Al-Ni-Gd metallic glass system, the composition of Al element is more than 80at% and this system has good glass forming ability.
在Al-Ni-Gd金属玻璃体系中，80at%以上的成分为Al元素，有很好的经济效益，且具有良好的玻璃形成能力。 - Taking into account the addition of carbon nanotubes have the possible negative effects on the glass forming ability, good glass forming ability of the alloy composition is the basis of toughening mechanisms of carbon nanotubes.
考虑到碳纳米管的添加对非晶形成能力可能造成的负面影响，制备得到非晶形成能力良好的合金成分是研究碳纳米管增韧机制的基础。 - Glass forming ability, preparation, microstructure and properties of multi-component bulk amorphous alloys have been studied in this thesis.
本文对多组元大块非晶合金的非晶形成能力、制备技术、结构及性能进行了研究。 - But because of its low glass forming ability, it is difficulty to extend its application.
但由于其玻璃形成能力较差，难以在实际工程中大量应用。